TERRACE
WAYERPROOFING

Providing Everything You Need

High performance Elastomeric acrylic based water proofing coating with antifungal and crack bridging ability. Recommended for protection of exterior cementitious surfaces. It is single component water based elastomeric acrylic waterproof coating. Its water proofing capabilities outshine regularpaint and form an effective barrier against penetration of water. It can be applied to most structural surfaces. The coating is flexible yet UV stable

> Stronger and thicker

Liquid-applied waterproofing is a popular solution for horizontal deck applications (roofing & Terrace), and this application is evolving as technologies improve and a wider variety of systems and feathers populate the category. There are hot-applied liquid waterproofing solutions made of weather-resistant and UV-resistant synthetic rubber, such as hot rubberized asphalt (HRA), and cold-applied liquid waterproofing solutions made of polymers, such as thermoplastic elastomers.

     > Elongation                                 Capabilities

An elastomeric, cold-applied liquid waterproofing solution’s flexibility combined with its tensile strength enables it to withstand stretching beyond the point where other (particularly hot-applied) liquid waterproofing solutions might break. This is just by nature of being an elastomeric; it comes with the very science of the coating.

SURFACE PREPARATION

Preparing the surface thoroughly by cleaning, washing and removing dust, dirt, mil,grease

CRACK REPAIR TECHNIQUE 

Establishing entry and venting ports at close intervals along the cracks, sealing the crack on exposed surfaces

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.

INJECTION GROUTING 

Injection grouting is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members.